|
| |
Designing and Projecting of the Scientific and Industrial Instruments
Telemetry
& Controls, Data Collectors, Loggers for the scientific applications
such in the hydrology,
meteorology,
ecology, forestry, agriculture,
entomology, zoology, etc. and for the industrial
applications such in the food, feed, irrigation, glass, cement and.
roller mill technologies; M2M
applications
 |
AEGPRSM-0607 GPRS Akımodem is a
class B, 4 band GPRS/CSD,
GPRS class 10, GPRS,CSD (transparent), SMS Reply Service and alarms featured
radio modem provide a reliable data communication between remote and office
stations.
|
|
Using of
OELimnigraph in the tank level control...
|
Önümüzdeki dönem tasarım ve geliştirme
programımızda yer alan çalışmalarımız:
|
Dataloggerlerin LAN veya Wi-Fi
ağa bağlanarak, ağdaki her makine ile iletişiminin sağlanması
|
|
Dataloggerlerin ofis ile,
uydu modem üzerinden iletişimi
|
|
Meteoroloji, hidroloji, hava
meydanları, ekoloji veya ziraat uygulamalarındaki, sıcaklık, nem, basınç, yağış,
sis, radyasyon, vs gibi büyüklüklerin ölçüm ve logu konusundaki gereksinmelerini
karşılamak üzere, çok kanallı datalogger
|
|
Hızlı PSTN modem (line modem)
|
|
Hızlı RF modem
|
|
 PSLimnigraph
(Pressure Sensor based Limnigraph)
has a build in 16 Bit A/D C and equipped with the precision
active and passive components, they are guarantied the high accuracy
measurements. The device is support derivative pressure sensor capacity for
lot of applications. |
 OELimnigraph
(Optical Encoder Limnigraph)
has a build in opticaly absolute encoder. Device can be measure with a
resolution up to 1 mm in the 128 mm pulley. Data
communications can be provide with direct cable via RS232 serial port, Line
Modem, GSM Modem, or RF Modem transparent; LAN or GPRS with TCP/IP
protocols transparent or through WEB server and browser. |
 SMS activated Telemetry System;
Alarm sending via SMS... Receiving of Data, Parameter and Informations in
the Remote Station via SMS Message |
|
 MCCPES
(Memory Card CNC Program Entry System)
is a HPGL or DIN 66024 program entry system for NC lathe or cutting mashine.
You can programming your old NC workbench through a contactless MEMO Card,
with the individuel program file in the PC you prepared and saved |
 Telemetry
and Control from the WEB; via GSM/GPRS, PSTN and LAN through WEB Browser
with TCP/IP protocols layers... |
 ReadOut
System consist of the ReadOut Transmitter and the ReadOut Receiver; The
system have RS485/RS422
digital and 4-20 mA, 0-24 mA, 0-10 V, 0-5 V and -5-+5 V analog outputs with
a galvanic insulation |
|
|
|
|
|
|
Note:
Please select "normal" in the document size menu for the best wiev |
|
